The VIVO Quad Pneumatic Monitor Mount review is for anyone planning a four-screen desk setup who wants adjustable outer arms and a clamp-mounted base.
Its mix of pneumatic arms and fixed center brackets makes monitor compatibility and layout planning especially important.
VIVO Quad Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V400G Quad Pneumatic Monitor Mount
A four-screen desk mount for people building a multi-monitor workstation with compatible 17- to 32-inch displays.
- Supports four screens measuring 17 to 32 inches, with a maximum weight of 17.6 pounds per monitor.
- Requires monitor mounting holes in either the VESA 75x75mm or 100x100mm pattern.
- Uses two pneumatic arms for the side monitors and fixed center brackets for the other two.
- The adjustable brackets offer +90° to -90° tilt, 180° swivel, and 360° rotation.
Pros
- Combines four monitor positions in one desk-mounted stand.
- Pneumatic arms allow the two side displays to be repositioned with counterbalanced support.
Consider before buying
- The two center monitor positions use fixed brackets, limiting how independently the full four-screen layout can be adjusted.
- Each screen must stay within the 17.6-pound limit and match one of the supported VESA patterns.
Read the full review summary
The STAND-V400G holds four monitors, with two pneumatic arms on the sides and fixed brackets in the center.
Each screen can weigh up to 17.6 pounds and should measure 17 to 32 inches, with VESA 75x75mm or 100x100mm mounting holes.
That combination targets established multi-screen workstations where keeping four displays on one stand is more useful than having full arm articulation at every position.
The two pneumatic arms are designed to counterbalance the side monitors, and their tension can be adjusted for lighter or heavier displays.
The mount clamps to a desk surface up to 3.25 inches thick, so it can free up some desktop area without drilling.
Before choosing it, map your screens’ VESA patterns, weights, widths, and desired positions; the fixed center brackets make the intended four-screen arrangement a key part of the decision.
The buying factors
VIVO Quad Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Four-screen capacity
A single mount supports four displays, with a per-screen limit of up to 17.6 pounds.
Screen compatibility
It covers many 17- to 32-inch monitors with VESA 75x75mm or 100x100mm patterns, though all three dimensions need checking.
Arm adjustability
The side arms tilt, swivel, and rotate, while the center brackets are fixed.
Pneumatic adjustment
Counterbalancing springs and adjustable tension are useful for positioning the two monitors on the articulated arms.
Desk mounting flexibility
The C-clamp fits desk surfaces up to 3.25 inches thick, but this design calls for a suitable clamping edge.
Setup practicality
Instructions and hardware are included, though assembling and arranging four screens takes more planning than mounting one or two.
Key Features and Specifications of VIVO Quad Mount
- Supports four screens measuring 17 to 32 inches, with a maximum weight of 17.6 pounds per monitor.
- Requires monitor mounting holes in either the VESA 75x75mm or 100x100mm pattern.
- Uses two pneumatic arms for the side monitors and fixed center brackets for the other two.
- The adjustable brackets offer +90° to -90° tilt, 180° swivel, and 360° rotation.
- Pneumatic springs counterbalance the side monitors, with tension that can be increased or decreased to suit their weight.
- Attaches to a desk surface up to 3.25 inches thick using a heavy-duty C-clamp; the listed materials are steel and aluminum, with plastic also noted in the construction details.
- Assembly instructions and hardware are included, and the mount comes with a three-year warranty.
Pros and Cons of VIVO Quad Mount
Pros
- Combines four monitor positions in one desk-mounted stand.
- Pneumatic arms allow the two side displays to be repositioned with counterbalanced support.
- Broad tilt, swivel, and rotation options help tailor viewing angles on the adjustable brackets.
- The clamp installation avoids drilling and is specified for surfaces up to 3.25 inches thick.
Consider before buying
- The two center monitor positions use fixed brackets, limiting how independently the full four-screen layout can be adjusted.
- Each screen must stay within the 17.6-pound limit and match one of the supported VESA patterns.
- A four-screen arrangement needs careful planning; confirm the clamp has a compatible desk edge and that the planned display layout fits your workspace.
Who Should Buy VIVO Quad Mount?
Good fit
Consider the VIVO STAND-V400G if your workstation genuinely benefits from four monitors and your screens fit its size, weight, and VESA requirements.
The two pneumatic side arms give you adjustment where screens may need to move during daily use, while fixed center brackets provide the other two mounting positions.
It may suit a desk where preserving surface area matters and a clamp can attach securely to an edge no thicker than 3.25 inches.
Check how the four displays will sit together, including their widths and the center positions, before ordering. Confirm each monitor’s VESA pattern and weight rather than relying on screen size alone.
The three-year warranty and included installation hardware are useful practical details for a substantial workstation mount. Still, the main value depends on whether the two adjustable arms and two fixed positions match the way you work.
Who should skip it
Skip this layout if you need every monitor to have its own articulated arm. The two center brackets are fixed, so a setup that depends on moving all four screens independently may call for a different design.
Look elsewhere if any monitor exceeds 17.6 pounds, falls outside the 17- to 32-inch range, lacks the compatible VESA holes, or your desk cannot accommodate the C-clamp.
How the VIVO Quad Mount Fits a Four-Screen Desk
Plan around the two fixed center positions
The distinctive layout pairs two pneumatic side arms with two fixed center brackets. That is a practical division if the side displays need repositioning while the center screens can stay put.
Sketch the intended arrangement first, especially if your monitors vary in size or you rely on frequent changes to screen angle.
Check all three monitor fit limits
The stated screen range is 17 to 32 inches, with a maximum of 17.6 pounds per monitor and VESA patterns of 75x75mm or 100x100mm.
A screen that meets only the size requirement may still be incompatible, so verify its weight and mounting pattern as well. Treat the weight ceiling as per monitor, not as a combined allowance for all four.
Use the pneumatic arms where movement matters
The side arms’ springs are intended to counterbalance the attached displays, and their tension can be adjusted for heavier or lighter monitors. The available tilt, swivel, and rotation give those positions room for angle changes.
These features make the most sense when the side screens benefit from adjustment; the center brackets do not share that same arm movement.
Confirm the desk edge and workspace
The heavy-duty C-clamp fits a desk surface up to 3.25 inches thick. Measure the edge where you plan to attach it and consider how the screens will occupy the desk once mounted.
A four-monitor stand can clear some space beneath the displays, but a suitable clamp location and workable screen arrangement remain essential.
Alternatives to VIVO Quad Mount
Computer Monitor Arms alternative

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V004F Quad Monitor Desk Stand
Choose the STAND-V400G if you want a clamp-mounted arrangement and pneumatic adjustment for the side screens.
Consider the STAND-V004F if a freestanding base and four adjustable arms better match your desk and preferred monitor layout; check that its base footprint fits.
- The STAND-V004F is also a four-screen stand, supporting 13- to 30-inch displays up to 17.6 pounds each.
- Its four adjustable arms attach to a freestanding base measuring 15.25 by 11 inches.
- The STAND-V400G pairs two pneumatic side arms with two fixed center brackets and supports four 17- to 32-inch screens up to 17.6 pounds each.
Computer Monitor Arms alternative

2,000+ ratings
Read Amazon ReviewsVIVO AeroPoise Dual Monitor Stand
The VIVO Quad is the closer fit when four display positions are required. The AeroPoise is worth considering for a two-monitor setup where both screens need spring-assisted positioning and a higher per-screen weight limit.
- The AeroPoise STAND-V002O is a two-screen mount with mechanical spring adjustment on both arms.
- It supports 17- to 32-inch monitors weighing 4.4 to 19.8 pounds each and offers a C-clamp or bolt-through grommet installation.
- The STAND-V400G supports four screens, but only its two side positions use pneumatic arms; its center brackets are fixed.
Is VIVO Quad Mount Worth It?
The VIVO STAND-V400G is worth considering for a four-monitor workstation that fits its screen, weight, VESA, and desk-clamp requirements.
Its pneumatic side arms and broad adjustment range offer useful flexibility for two displays, while the fixed center brackets define the rest of the layout.
Measure and map your setup before buying.
If you want four articulated arms, or your desk edge or monitors fall outside the listed limits, this mount is a poor match; if the fixed-center arrangement works for you, it brings four screens onto one clamp-mounted stand.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V400G Quad Pneumatic Monitor Mount
A four-screen desk mount for people building a multi-monitor workstation with compatible 17- to 32-inch displays.
- Supports four screens measuring 17 to 32 inches, with a maximum weight of 17.6 pounds per monitor.
- Requires monitor mounting holes in either the VESA 75x75mm or 100x100mm pattern.
- Uses two pneumatic arms for the side monitors and fixed center brackets for the other two.
- The adjustable brackets offer +90° to -90° tilt, 180° swivel, and 360° rotation.